Specifications - Haussmann Xpert PNT180 Manuel De L'utilisateur

ADDITIONAL SAFETY INSTRUCTIONS FOR AIR-POWERED MULTI-PURPOSE TOOL
Avoid accidental injury. Keep hands and fingers safely away from the oscillating

scraper, blades, sanding pad and sandpaper when operating the tool.
Before each use make sure retainer and cap screw are tightly secured for safe

and efficient operation.
Attach all accessories properly to the tool before connecting the air supply. A

loose accessory may detach or break during operation.
Follow the manual directions for the air compressor used to power this tool.

Install an in-line shutoff valve to allow immediate control over the air supply in an

emergency, even if a hose is ruptured.
Replace bent or damaged blades.

Use this tool with both hands only. Using tools with only one hand can result in

loss of control.
Do not lay the tool down until it has come to a complete stop. Moving parts can

grab the surface and pull the tool out of your control.
This tool vibrates during use. Repeated or long-term exposure to vibration may

cause temporary or permanent physical injury, particularly to the hands, arms and
shoulders. To reduce the risk of vibration-related injury:
a) Anyone using vibrating tools regularly or for an extended period should first be
examined by a doctor and then have regular medical check-ups to ensure medical
problems are not being caused or worsened from use. Pregnant women, people
with diabetes or people who have impaired blood circulation to the hand, past
hand injuries, nervous system disorders, or Reynaud's Disease should not use
this tool. If you feel any symptoms related to vibration (such as tingling,
numbness, and white or blue fingers), seek medical advice as soon as possible.
b) Do not smoke during use. Nicotine reduces the blood supply to the hands and
fingers, increasing the risk of vibration-related injury.
c) Wear suitable gloves to reduce the vibration effects on the user.
d) Use tools with the lowest vibration whenever possible.
e) Include vibration-free periods each day of work.
f ) Grip tool as tightly as possible (while still keeping safe control of it). Let the tool
do the work.
g) To reduce vibration, maintain tool as explained in this manual. If abnormal
vibration occurs, stop immediately.

SPECIFICATIONS

This HAUSSMANN XPERT air-powered multi-purpose tool is made of die-cast
aluminum housing for better durability. The spindle & blade arbour locks the blade in 7
forward positions for versatility. Safety catch prevents accidental starts.
No-load speed: 0-20,000 RPM

Oscillation angle: 1.5° [left/right]

Air pressure: 90 PSI

Air consumption: 3.5 CFM@ 40 PSI and 4.4 CFM@ 90 PSI

Hose size: 3/8" (10 mm)

Air inlet: 1/4" (6 mm) NPT

ACCESSORIES
1-1/4" (32 mm) cutting blade

2" (50 mm) rigid scraper blade

3" (75 mm) triangular sanding pad

3 sandpapers

1/4" (6 mm) NPT quick-connect plug

Hex key

18
PNT180