Dörr Kompakt X12M Notice D'utilisation page 7

Note Please note that batteries often are not fully charged when purchased. We recommend checking and if
necessary charging the battery before starting operation. Use a customary charger.
3. Place the battery in the battery compartment (4) and close the compartment cover (5).
Note When changing the battery, we suggest leaving the feeder main switch (11) in position ON in order to avoid
the loss of settings.
SAFETY HINTS FOR RECHARGEABLE BATTERIES
Only use high-quality batteries of popular brands. When inserting the battery please respect the correct polarity (+/-). Please
remove battery when device is not in use for a long period of time. Do not throw the batteries into fi re, do not short-circuit and
do not disassemble them – risk of explosion! Remove leaking batteries from the device immediately. Risk of battery acid burn!
Clean the contacts before inserting fresh batteries. In case of contact with battery acid, rinse the a ected area immediately
with water and contact a doctor. Batteries can be dangerous to life if swallowed. Keep batteries away from small children and
pets. Do not dispose of batteries in household waste (see also capture "Disposal of Batteries/Accumulators").
07 | PROGRAMMING THE TIMER
1. Open the timer compartment (1) pressing the compartment cover (2) upward and drawing the fl ap outwards.
2. Slide the On/O switch (11) to position ON.
7.1 TIME SETTING
1. After you have set the On/O switch (11) to the ON position, the hour display starts blinking. Use the +/- buttons (9) to adjust
the hour (12 hour format).
2. After 6 sec., the minute display starts blinking. Use the +/- buttons (9) to set the minutes.
3. After another 6 sec. the weekday can be set using the +/- buttons (9). Wait for 6 sec. and the programming of time, date and
weekday is done.
7.2 SETTING THE FEEDING TIMES
Up to 16 feeding times can be programmed for each weekday. Proceed as follows:
1. Press the PROG button (10).
2. The display (7) shows Mo for Monday and the number 1 for the fi rst feeding time. After 6 sec. you can enter the hour with the
+/- buttons (9) and after another 6 sec. you can enter the minutes.
3. After entering the time Mo is blinking. Press the +/- buttons (9) to set the weekdays, the feeder should start to feed at fi rst
feeding time.
12
It is possible to select each weekday separately or you can choose one of the following pre-settings:
Monday to Sunday
•
Monday to Friday
•
Saturday and Sunday
•
Monday to Saturday
•
Monday, Wednesday, Friday
•
Tuesday, Thursday, Saturday
•
Monday to Wednesday
•
Thursday to Saturday
•
Monday, Wednesday, Friday, Sunday
•
4. After 6 sec. the selected setting is programmed and in the display the number 30 is blinking. Now you can set the desired
duration of the feeding from 30 to 1 second using the +/- buttons (9).
After further 6 sec. the fi rst feeding time is set and the display (7) shows the main menu with the present time.
To select further feeding times, press the PROG button (10) again and then the + button (9). In the display (7) the number 2 is
blinking. Now you can enter a second feeding time like described above.
For further 3-16 feeding times please repeat the setting accordingly.
7.3 TEST FUNCTION
After installation of the feeder, this function allows checking if the feeding time, quantity and range of feeding are correct –
depending on the type of feed.
1. Press the TEST button (8). The display (7) shows TEST and the number 30 (indicates the length of test feeding in seconds).
2. Use the +/- buttons (9) to set the duration of the test feeding from 30 to 1 seconds.
Note We recommend a max. test duration of 1-2 seconds, so only a small quantity of feed is spread for testing
purposes.
3. Confi rm the test duration with the TEST button (8). The test feeding will start within 3 seconds.
CAUTION Keep a distance of minimum 7m from the feeder for both test and regular operation. Protect your eyes and
extremities! The fast rotation of the feeding engine and the ejected feed can be harmful.
Mo = Monday
Di = Tuesday
Mi = Wednesday
Do = Thursday
Fr = Friday
Sa = Saturday
= Sunday
So
13