Pattfield Ergo Tools PE-36B Traduction De La Notice Originale page 89

hAnDLe poSItIon
1 To set the straight position, press the
handle release button
tool head.
fIt BIt
1 Fit the required bit into the bit adap-
tor 3.
rotAtIon DIrectIon
1 To drive in screws, set the rotation di-
rection switch to r
warning! If the screwdriver is not in
use, centre the rotation direction
switch, in order to lock the screwdriver.
5 and twist the
.
2 To set the angled position, press the
handle release button
tool head.
2 Set the desired torque at the torque
ring 2:
1-6 Torque settings
Torque deactivated
Remove the bit by pulling it out of the
bit adaptor 3.
2 To loosen screws, set the rotation di-
rection switch to L
.
5 and twist the
EN 87