Product Overview; Using The Tool; Intended Use; Battery Power - Pattfield Ergo Tools PE-36B Traduction De La Notice Originale

product overview

1 Battery power check
2 Torque ring
3
Bit Adaptor
4
LED
5 Handle release button
6 Rotation direction switch
7 On / Off switch
8 Charging jack

Intended use

The tool is intended for driving in and loosen-
ing screws in wood, metal and plastic.
The tool is not intended for commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
chArger Set-up
1 Plug the battery adaptor plug into the
charging jack. The red LED lights up.
caution! Only use the provided bat-
tery adaptor in order to charge the
battery.
86 EN

using the tool

1. To switch on the tool, press the on / off
switch 7.
2. Make sure your workpiece can not slip.
Start working, while holding the tool
firmly.
3. To switch off the tool, release the on / off
switch 7.
warning! If the screwdriver is not in
use, centre the rotation direction
switch, in order to lock the screwdriver.

Battery power

Press the battery power check button
check the remaining battery power:
red, yellow, green
red, yellow
red
2 When the red LED turns off, discon-
nect the battery adaptor plug form the
charging jack.
1 to
80-100 %
40-79 %
0-39 %