Specific Safety Instructions And Warnings - BASETech 1911203 Notice D'emploi

• Service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
• When servicing a product, use only identical replacement parts. Use of
unauthorized parts or failure to follow maintenance instructions may create a risk
of injury.
• Maintain a safe working environment. Keep the work area well lit. Make sure there
is adequate surrounding workspace. Keep the work area free of obstructions,
grease, oil, trash, and other debris. DO NOT use this product in a damp or wet
location.
• Avoid accidental fire and/or explosion. DO NOT smoke near engine fuel and
battery components.
• The warnings, precautions, and instructions discussed in this manual cannot
cover all possible conditions and situations that may occur. The operator must
understand that common sense and caution are factors that cannot be built into
this product, but must be supplied by the operator.
• We believe the information contained herein to be reliable. However, general
technical information is given by us without charge and the user shall employ
such information at their own discretion and risk. We assume no responsibility for
results or damages incurred from the use of such information in whole or in part.
• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Specific safety instructions and warnings
• WARNING: Be sure to keep exposed skin and flammable clothing away from
hot components being viewed with the thermal imaging camera. Take appropriate
precautions when working near electrical or moving parts. THIS DEVICE IS
NOT FOR MEDICAL USE AND SHOULD NEVER BE USED AS A HEALTH OR
MEDICAL CARE DEVICE.
• CAUTION: Keep the thermal imaging camera at a safe distance from hot
components being viewed. Failure to do so may cause damage to the camera.
• DO NOT point the thermal imaging camera at strong energy sources such as
devices that cause laser radiation, or the sun. This can negatively affect the
accuracy of the camera and may cause damage to the detector in the camera.
• DO NOT use the camera on temperatures higher than the rated maximum
temperature. Exceeding the temperatures specified can cause damage to the
camera.
22