Dörr JL-3 LED Notice D'utilisation page 8

05 | INSERTING THE BATTERIES
Unscrew the light end piece (4) counter clockwise to the left. Insert the supplied CR123 A
batteries into the battery compartment (3) according to correct polarity (+/-). Screw on
the light end piece (4) again.
Alternatively, the torch can be operated with a rechargeable battery type
NOTE
18650 (optionally available in stores).
CR123A
18650 (OPTIONAL)
06 | OPERATION
06.1 TURN ON/OFF THE LIGHT
To turn on the light and for continuous operation, firmly press the on/off button (5) at the
light end piece until it clicks.
To switch on the torch silently, just lightly tap and hold the on/off button (5).
CAUTION
Do not look directly into the LED and do not direct the light beam into the eyes of humans
or animals!
NOTE During the operation the aluminum housing will warm up.
Press the on/off button (5) to turn off the light after use.
06.2 RED/GREEN TOP FILTER
Make sure to turn off the light with the on/off button (5) before mounting the top filter (7).
Insert the desired top filter (9, red or green) into the rubber filter cap (8) and push the filter
to the front.Pull the filter cap (8) over the LED light head.
White LED (without top filter): Ultra-bright light for clear view by night
With red/green top filter: Almost invisible for wildlife
06.3 REMOTE SWITCH
Make sure to turn off the light with the on/off button (5) before mounting the remote
switch (7). Unscrew the light end piece (4) counter clockwise to the left. Screw the end
piece of the remote switch (7a) to the light body.
The pressure switch (7b) allows a silent operation of the torch. To switch on the light,
press and hold the pressure switch (7b). To switch off the light, release the pressure
switch.
CR123A
07 | CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recommend
a soft, slightly damp microfiber cloth to clean the outer parts of the device. Turn off the
device and remove batteries before cleaning. Store the device in a dust-free, dry and cool
place. This device is not a toy – keep it out of reach of children. Keep away from pets.
08 | TECHNICAL SPECIFICATIONS
Functions 100% Brightness
Brightness approx. 800 Lumen
Runtime approx. 1,5 h
Illuminant
1 CREE® XML-T6
Beam distance up to 250 m
Impact resistance
up to 1 m drop height
Water resistance IPX6
Power source 2x CR123 A batteries (included)
alternatively with 1x Li-Ion Battery type 18650 (optional)
Dimensions Length approx. 138 mm, ø approx. 26 mm
Weight approx. 110 g (including batteries)
Remote Switch Cable length approx. 35 - 50 cm
09 | SCOPE OF DELIVERY
1 JL-3 torch
each 1 top filter red + green
1 Filter cap
1 Remote switch
2 Panasonic CR123 A batteries
1 Hand strap
1 Nylon pouch
1 Safety hints
8
50% Brightness
approx. 400 Lumen
approx. 2,5 h