Publicité
User Manual
Safety Instructions
! WARNING !
Please read the following safety information carefully and always keep this document with
the product.
Failure to follow these precautions can result in serious injuries or death from electric
shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock, which
may result in death.
This device is a switching type power supply and can work with supply voltages in the range 100 - 240
VAC. For worldwide usability four different AC adapters are enclosed: Euro type, UK type, US/Japan
type and Australia/New Zealand type. Use the appropriate AC adapter as shown in the picture and
ensure it is firmly secured in place and does not detach by pulling before installing into a power socket.
To reduce risk of fire, electric shocks or damage:
▪
Do not open the product nor its power supply. There are no user serviceable parts inside.
▪
Only qualified servicing personnel may carry out any repairs or maintenance.
▪
Never use damaged cables.
▪
Do not expose the product to water or places of moisture.
▪
Do not use this product outdoors it is intended for indoor use only.
▪
Do not place the product near direct heat sources. Always place it in a well-ventilated place.
▪
Do not place heavy items on the product or the cables.
▪
Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket
Introduction
Thank you for purchasing the Single Port USB Type C Smart Travel Charger with PD, 18W. This product
has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty
and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it
for future reference.
Package Contents
▪
Single Port USB Type C Smart Travel Charger with PD, 18W
▪
Multi Country Adapters - UK, EU, US and AUS
▪
This Manual
Instructions for Use of Power Supply
The required multi-country adapter must be attached before
inserting the unit into a wall socket. To connect the correct adapter,
slide the chosen attachment onto the unit until it clicks into place.
To disconnect an adapter push down on the release button and
slide the adapter upwards. Output charging will commence once a
device is inserted into the USB port and mains voltage is supplied
to the unit. The Smart IC control is completely automatic and will
adjust to the needs of your device.
English
Publicité
