Publicité
Les langues disponibles
Les langues disponibles
User Manual
Specification
• Input ports: 3x HDMI 2.0 Female, DisplayPort 1.2a Female and VGA Female, 5x Stereo Terminal
blocks, 1x Mic Terminal Block
• Output ports: 1x HDMI Female, 1x HDBaseT, 1x Stereo Terminal block
• Control Ports: 1x IR in, 1x IR out, 1x Contact Terminal block (6pin), 1x RS-232 terminal block, 1x RJ-
45, 1x USB Type A Female (firmware upgrade)
• Supports up to 18 Gbps / 600Mhz bandwidth
• Supported Resolutions
•
HDMI / DisplayPort up to 3840x2160@60Hz 4:4:4 8bpc (30Hz output)
•
VGA up to 1920x1200@60Hz
•
HDBaseT up to 3840x2160@30Hz
• PCM stereo pass-through formats
• Optional phantom power for mic input
• HDCP 2.2 and 1.4 compatible
• Colour: Black
• Power Consumption: Main unit: 9W, HDBaseT Receiver: 9W
• Operating Temperature: 0°C - 40°C (32°F - 104°F)
• Storage Temperature: -20°C - 60°C (-4°F - 140°F)
• Relative humidity: 20 – 90% RH (non condensing)
Installation
Front Panel:
Power button and indicator:
When this device is in standby mode the indicator will illuminate red. When switching the unit
on, the indicator will illuminate blue.
IR Window:
IR signal from remote control.
Input Source & Auto buttons:
Press these buttons for source selection.
The active source will be
illuminated
to corresponding indicator on the front panel.
English
Publicité
