Télécharger Imprimer la page

Westfalia SHARK Mode D'emploi Original page 14

Scie sabre sans fil

Publicité

Les langues disponibles
  • FR

Les langues disponibles

▪ Refer to the section of this manual relating to use of the battery charger
before attempting to charge the battery.
▪ Do not attempt to use the charger with any batteries other than those
supplied. Failure to follow these instructions may cause overheating or
fire.
▪ When battery pack is not in use, make sure the battery pack cannot be
shorted accidentally. Keep the battery clean at all times. Keep it away from
other metal objects, like paper clips, coins, keys, nails, screws or other
small metal objects that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a
fire.
▪ Allow batteries to cool for 15 minutes after charging or heavy use. Failure
to follow these instructions may cause overheating or fire.
▪ Use only chargers recommended by the manufacturer to charge the
batteries. If a charger is not suitable for a certain kind of battery there is a
risk of fire. Only use Li-Ion batteries provided with a product or specifically
designed to be compatible.
▪ Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
▪ The unit is designed for operation in altitudes of up to 2000 m above sea
level.
▪ Keep the battery out of reach of children.
▪ When not in use batteries should be stored at room temperature
(approximately 20˚ C).
▪ Do not open, disassemble, crush, heat above 60° C or incinerate. Do not
dispose of in fire or similar.
▪ Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when
used with another battery pack.
▪ If liquid contacts eyes, additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
▪ Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
▪ Do not use damaged or modified batteries. Damaged or modified
batteries may act unpredictable and cause fire, explosions or physical
injury.
▪ Do not expose a battery to fire or excessively high temperature. Fire or
temperature in excess of S 130 °C may cause an explosion.
▪ Follow all Instructions for charging and never charge the battery outside
of the temperature range between 0 and 40° C. Incorrect charging or
14

Publicité

loading

Ce manuel est également adapté pour:

945355