Bresser MyTime Duo Mode D'emploi page 13

will blink. Press MIN/DATE button to reach the desired
minute.
Set date:
Slide SET button into DATE SET mode, the month mode
will blink. Press MIN/DATE button to reach the desired
date.
AL SELEcT slide-button (7)
Slide AL SELECT button (7) to switch the alarm function
between WORKING DAY mode (five days alarm) and
NORMAL mode (one day single alarm).
Slide the button into WORKING DAY side,
shown on displays.
Illumination button (2)
Press the illumination button (2) to turn on the LED back-
light for 10 seconds.
RESETTING THE uNIT
In case of malfunction or abnormal display, take out and
re-install the batteries again. All settings will be cleared
and reset to their default values.
mAINTENANcE/cLEANING
Before cleaning the device, disconnect it from the power
supply (remove batteries).
Only use a dry cloth to clean the exterior of the device.
To avoid damaging the electronics, do not use any clean-
ing fluid.
mO-FR
is
Protect the device from dust and moisture. The batteries
should be removed from the unit if it has not been used
for a long time.
DISPOSAL
Dispose of the packaging materials properly, ac-
cording to their type, such as paper or cardboard.
DE
GB
FR
NL
IT
ES
13