Bresser MyTime Duo Mode D'emploi page 12

Slide SET button (8) into AL SET mode when the respective
alarm mode is in display. Then the alarm mode will blink,
press HOUR/MONTH button (5) to reach the desired hour,
press MIN/DATE button (6) reach the desired minute.
Note:
How to switch between Alarm1 and Alarm2:
Slide SET button (8) into AL SET mode, press 12/24 YEAR
button (4) to switch between single
mode. After done, slide SET button into LOCK mode to
finish the alarm setting.
12/24 YEAR button (4)
Set 12 or 24 hours system:
Slide the SET button (8) into LOCK mode.
Press to switch between 12hr or 24hr system. When 'AM'
appears, it means 12hr. Press 12/24 YEAR button again,
'AM' will disappear, it means 24hr system.
12
Set year mode:
Slide SET button into DATE SET mode, the date setting
mode will blink. Press 12/24 YEAR button to reach the
desired year.
HOuR/mONTH button (5)
Set hour:
Slide SET button (8) into TIME SET mode, the time mode
or dual alarm
will blink. Press HOUR/MONTH button to reach the de-
sired hour.
Set month:
Slide SET button into DATE SET mode, the month mode
will blink. Press HOUR/MONTH button to reach the de-
sired hour.
mIN/DATE button (6)
Set minute:
Slide SET button (8) into TIME SET mode, the time mode