BE Power Equipment P1715EN Manuel D'utilisation page 10

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
11
H
Foam Cannon Installation
The foam cannon comes with a straw which is fitted
into high pressure top. If you do not see the straw,
look inside the foam cannon and attach it to the high
pressure top. When using foam cannon, fill it with a
properly formulated detergent or cleaner with a water
ratio according to instructions on the container.
• Pressure washer detergents are recommended.
See page 13 for more information.
• DO NOT use thick or gel-like detergents as they will
clog the foam cannon and can cause damage.
13
750ml
H
600ml
450ml
300ml
150ml
Foam Cannon Storage
Store the foam cannon (H) on the back of the power
washer unit (C).
10
750ml
600ml
450ml
300ml
150ml
C
12
H
Insert foam cannon (H) into spray gun (F), push in
and turn clockwise.
Note: Always lock spray gun when changing the foam
cannon to ensure it does not eject with force.
14
Attach a standard garden hose to the black collar of
the garden hose adapter located on the back of the
power washer unit (C). The water is now connected
to your power washer.
Flush out garden hose before connecting
Note:
to garden hose adapter.
bepowerequipment.com
F
C