Télécharger Imprimer la page

Antec P180 Manuel De L'utilisateur page 8

Masquer les pouces Voir aussi pour P180:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
A fan-controller regulates the fan speed by varying the voltage to it. The voltage
may start as low as 4.5V to 5V. Connecting a TriCool™ set on Medium or Low to a
fan-control device may result in the fan not being able to start. The already
lowered voltage from the fan controller will be further reduced by the TriCool™
circuitry below 5V.
The Top and Rear Exhaust TriCool™ Fans
External fan switches allow adjusting the speed of these two fans without having
to open the case.
Note: We recommend that our users set these two fans to Low in order to cool
the CPU more effectively.
The two fans are mounted so that the air is blowing out of the case. The top fan
comes with a spoiler to mount on the top of the case.
To install the spoiler:
1.
With the higher end of the spoiler facing the rear of the case, carefully align
the tabs of the spoiler with the notches on the case.
2.
Insert the tabs to the notches and slide the spoiler towards the front of the
case until it clicks into position.
The Lower Chamber TriCool™ Fan
This is a standard 120mm fan. This fan is placed in the middle of the lower
chamber which acts like a wind tunnel when side panels are closed, which
guarantees the air will move from the front to the rear when the fan turns.
Note: We recommend setting the speed to Medium or Low.
Specifications:
Size:
Rated Voltage:
Operating Voltage:
Speed
Input
Current
High
2000 RPM
Medium
1600 RPM
Low
1200 RPM
The Optional Fans
There are two optional 120mm fan mounts – a front fan (in front of the upper
HDD cage) and a middle fan (at the rear end of the upper HDD cage). These two
fans should be installed so that the air is blowing into the case from the front.
The Front Fan – The front fan is designed to enhance the HDD cooling. If you
decide to mount any HDD into the upper cage, you will not be able to use the
middle fan.
120 x 120 x 25.4mm TriCool™ Fan
DC 12V
10.2V ~ 13.8V
Air Flow
0.24A
2.24 m³ / min
(Max.)
(79 CFM)
0.2A
1.59 m³ / min
(56 CFM)
0.13A
1.1 m³ / min
(39 CFM)
Static
Pressure
2.54 mm-H
O
2
(0.10 inch-H
O)
2
1.53 mm-H
O
2
(0.06 inch-H
O)
2
0.92 mm-H
O
2
(0.04 inch-H
O)
2
6
Acoustical
Input
Noise
Power
30 dBA
2.9 W
28 dBA
2.4 W
25 dBA
1.6 W

Publicité

loading

Ce manuel est également adapté pour:

P180bP182P182se