Xoro HTC1900D Manuel D'emploi page 77

DVB-T OPERATION GUIDE
First Time Setup
In picture 1, a message appears, asking 1.
you if you want to run the First Time
Installation Wizard. Upon selecting"Yes,
a new box appears, as shown in picture
2, asking for country, OSD language, and
time zone. Use the arrow keys to make
the correct selections.
Select "Next" and press ENTER to
2.
proceed to the next screen, which is
shown in picture 3. On this screen, you
will be asked if you want to perform an
auto-scan of the channels.
If you select "Yes", a new window, will
appear, asking if the results are to be
saved, while selecting "No" will exit
setup. 3.
When asked if the results are to be
saved, selecting "Yes" will automati-
cally start the channel search, as shown
in picture 4. The results will be saved by
frequency range.
If you choose to save the results, a
4.
screen will appear, asking if the channel
information should replace the existing
information.
After choosing"Yes"or"No", the
channel search will begin.
33