BestMatic SDF-126339.5 Mode D'emploi page 11

Defrosting
Caution:
Never use metal objects (e.g. knifes) to remove ice from the evaporator. Otherwise, it can be damaged.
Note:
To achieve better cooling and to save energy, defrost the appliance regularly as follows:

To start the defrosting process, disconnect the appliance from the power supply.

Remove the appliance content and keep covered at a cool location.

Place a drip tray under to catch leaking water.

When the ice has melted, wipe the condensate away and dry the appliance interior.

Then you may restart the appliance by connecting the plug and turning the temperature control.
TROUBLESHOOTING
Before you contact an authorized specialist
Problem
Unit is not working properly or at
all
Loading is too warm
Loud noise during operation
Water on the unit bottom
Note: If a problem persists after following the steps above, contact your trader or an authorized technician.
TECHNICAL SPECIFICATIONS
Rated voltage:
Rated current:
Rated frequency:
Climate class:
Refrigerant:
Protection against electrical shock:
Insulation blowing gas:
Climate class:
- Extended temperate (SN): 'this refrigerating appliance is intended to be used at ambient temperatures
ranging from 10°C to 32 °C';
- Temperate(N): 'this refrigerating appliance is intended to be used at ambient temperatures ranging from
16 °C to 32 °C';
Cause / Action

Check the power supply / temperature
setting / ambient temperature.

Unblock the ventilation openings, install
the unit freely.

Check the temperature setting / ambient
temperature.

Open the door only as long as necessary.

Check the appliance position.
See the section "Operating noise".


Check the temperature setting.
220-240V~
0.7A
50Hz
SN/N/ST
R600a (72g)
I
Cyclopentane
- 10 -