Powerfix Profi HG04646 Instructions D'utilisation Et Consignes De Sécurité page 9

Choose the most suitable lashing strap in accordance with the
intended load that needs to be lashed down, the tensile load and
loading surface (see label) .
Check that the vehicle parts you wish to strap the load to are sturdy
enough .
Make sure that the lashing straps are not twisted/knotted and that
the load is distributed across their entire width .
Keep lashing strap away from hot surfaces .
Evenly distribute the lashing straps on the load to be secured .
Never use the lashing straps to lift loads .
m CAUTION! DANGER OF ACCIDENT! Always choose suitable
lashing straps, lashing points and lashing methods . The size, shape
and weight of the cargo as well as the intended mode of use, the
transport environment and the type of cargo determine the correct
choice .
Do not exceed the roof load indicated by the vehicle manufacturer .
m CAUTION! DANGER OF ACCIDENT! When lashing down, pay
attention to the required pre-load force . At least 2 lashing straps
are required . For reasons of stability, at least 2 lashing straps of the
same kind must be used for lashing down and 2 pairs of lashing
straps of the same kind used for diagonal lashing .
m CAUTION! DANGER OF ACCIDENT! During transportation,
regularly check that the cargo is correctly lashed and tighten the
lashing strap if necessary .
GB/IE/NI 9