Powerfix Profi HG04646 Instructions D'utilisation Et Consignes De Sécurité page 13

Tendeur à cliquet pour charges lourdes avec support
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

12 . Care should be taken that the lashing is not damaged by sharp
edges of the load on which it is used .
A visual inspection before and after each use is recommended .
13 . Only legibly marked and labelled web lashings shall be used .
14 . Lashing straps must not be overloaded: The maximum hand force
25 daN for model HG04648; 50 daN for model HG04646 and
HG04647 (1 daN ≈ 1 kg) may be applied . Mechanical aids such
as bars or levers etc . may not be used unless they are part of the
tensioning device (HG04646 / HG04647 / HG04648) .
15 . Lashings shall never be used when knotted .
16 . Damage to labels shall be prevented by keeping them away from
sharp edges of the load and, if possible, from the load .
17 . Webbing must be protected against friction, abrasion and damage
from loads with sharp edges by using protective sleeves and / or
corner protectors .
˜ Use
Lashing down (HG04646 / HG04647 / HG04648):
With lashing straps stretched over it, the load is pressed down onto the
loading area (Fig . I) .
Diagonal lashing (HG04648):
The load is secured by 4 lashing straps and directly connected to the
vehicle (Fig . II) .
GB/IE/NI
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hg04647Hg04648

Table des Matières