Bionaire BU8000 Manuel D'utilisation page 10

TROUBLE SHOOTING
PROBLEM
Control panel screen
is dark, no mist and
no airflow from the unit
Control panel screen is
illuminated and flashing,
and there is no mist
There is not
enough mist
Mist has bad odour
Abnormal noise
CAUSE
Unit not turned on
Not connected to main supply
No water in the water tank
The Mist Control is on the
Lo Setting
Resonance from the surface
bearing the unit
Scale covers the transducer
Dirty or stagnant water in tank
New appliance (out of the box)
Not fresh or filtered water for
proper results
Resonance effect due to too
little water in the water tank
Resonance from the surface
bearing the unit
6
SOLUTION
Turn on unit
Connect to main supply
Refill water in water tank
Change the Mist Control to
Hi Setting (see Mist Control
instructions)
Place the unit on a steady
surface or
on the ground
Clean the transducer softly with
a damp cotton ball. Transducer
surface is delicate; avoid
applying excessive pressure.
Empty tank and refill with fresh
water
Open the water tank and place
the appliance in a cool area for
12 hours.
Wash the tank out or change
the water.
Refill water in the water tank
Place the unit on a steady
surface or on the ground