Use And Functions; Heating Power; Service, Storage And Care Of The Powerpacks - therm-ic PowerPack Max Mode D'emploi

I NSTRUCTI ONS FOR USE / ENGLI SH
 When starting up, do not allow step 3 to be
switched on longer than a few minutes in each
case, otherwise too much heat can be produced
during operation – danger of burning.
 Always set Powerpacks to level 1 or 2 to maintain
a comfortable level of warmth for your feet
(heating should be almost undetectable).
 The optimum heat output is achieved when your
shoes and soles are dry.
USE AND FUNCTI ONS
The desired heat level can be set individually for
each Powerpack using the level switch (levels 1, 2,
3).
H E A TI N G P O WE R
Max.
Level temperature*
(°C / °F)
1 37°C / 99°F
2 45°C / 113°F
3 70°C / 158°F
* Measured directly on the heating element under
laboratory conditions
The heating duration per charge depends on the
selected heating level, the ambient temperature
and the charging status as well as the age of the
batteries.
S E R VI CE, S TORA G E A N D C AR E O F T H E
P O WE R PA C KS
To ensure a long life, we recommend storing the
Powerpacks in a cool room (at temperatures
ranging from 5°C / 41°F to 20°C / 68°F) in a fully
Heating period
per battery
charge
9 - 14 hours
4 - 6.5 hours
1.8 – 2.5 hours
12