How to care
1
Make sure the machine is turned off
and unplugged before beginning
disassembly. Empty out the drum of all
the ingredients by keeping the machine
running for few extra seconds before
stopping.
2
Separate the drum and chute from
the base unit by turning the clip
counterclockwise.
3
Remove the nozzle and disassemble the
drum and auger as shown next.
4
Wash drum and auger with mild
detergent, using the soft brush.
Rinse with water and dry thoroughly.
8
5
Scrub the strainer with the soft brush
angled at a 45 degree angle.
When cleaning the drum cap, detach the rubber ring
TIP
and place it back on with its protruding part facing the
the front of the drum cap when fi nished cleaning.
6
Wipe the base unit with a soft, damp cloth.
ATTENTION!
If the cloth is too wet water
may migrate into the machine causing
fi re, electric shock, or permanent damage.
For Cleaning
.
Most juicer parts are top shelf dishwasher safe, low temperature recommended.
For best results hand wash with a soft cloth using mild detergent and towel dry.
The juicing strainer is hand wash only (included cleaning brush or similar plastic
bristled dish brush is recommended).
.
Do not wash any juicer parts with harsh or abrasive cleaners.
.
Please wipe the exterior clean using a damp soft cloth. Do not wash or submerge the base.
Disassembly / Cleaning / Maintenance
9