Beaba UPDOWN Instructions De Montage page 9

INSTRUCTIONS FOR LOCKING
THE SWING FUNCTION
A swing function is available to enable you to rock the bouncer. To lock this position, pivot the stabiliser until it touches the
ground.
INSTRUCTIONS FOR SETTING
THE HEIGHT
PUSH !
CLIC !
PUSH !
CLIC !
The Up & Down bouncer may be set to 4 predefined heights.
To set the height of the bouncer, press down simultaneously on the buttons of the seat structure (G) and adjust to the desired
height. Release the two buttons ensuring that the seat structure (G) is locked properly on each of the tubes (A) or (B).
Attention! For reasons of security, never adjust the height when the child is in the bouncer.
PUSH !
CLIC !
PUSH !
CLIC !