Beaba UPDOWN Instructions De Montage page 8

ASSEMBLY INSTRUCTIONS
FOR LOW POSITION
To use your bouncer in the low position, follow the assembly instructions above without inserting the large tubes (A). Then
fasten the handles (E) to the small tubes (B).
INSTRUCTIONS FOR SETTING
THE INCLINE AND FOLDING
To set the incline of the bouncer seat, place your hand on the top of the seat back and press the button at the rear. Release the
button at the desired position. Always hold the seat back when adjusting, especially if a child is in the bouncer.
To fold the bouncer, press the button and fold the back over the seat.