Installing The V2 Cless; Module - Parkeon V2 CLESS Notice D'utilisation

13.INSTALLING THE V2 CLESS

4.1 Module

Tools required: Philips head screwdriver
Time required for the intervention: 2 min
Other components to remove/Preliminaries: switch off the power to the devices in EMS mode
or with the button on the front of the CPU.
•
Disconnect the antenna cable and the contactless reader cable.
•
Slightly unscrew the two fastening screws with a Philips head screwdriver.
•
Unscrew the two bolts holding the drive module.
Fixing screws
X2
•
Remove the faulty drive module housing.
•
Mount the new drive module with SAMs (if present in the former).
•
Connect the cables on the previous drive module.
•
Press the power button device of the CPU.
•
Perform a functional test using the "test connection map" from the menu EMS "travel card
reader.
Contactless reader
V2 CLESS – NOTICE D'UTILISATION - USER MANUAL v1.0
Antenna
cable
Contactless
reader cable
18