Safety Instructions - Parkeon V2 CLESS Notice D'utilisation

10.SAFETY INSTRUCTIONS

D- In order to power down your V2 CLess :
Disconnect the V2 Cless power supply block from the electric power supply network
E- Electrical power supply
a. Only use Parkeon Contacless reader cable
b. Only use Parkeon antenna cable with it's Ferrite for EMI protection
c. The V2 Cless input voltage should be +12VDC +/- 10%
F- Reader cover Flap
The cover flap located on the side ( see chapter – installation and removal of Sams) must be
in place during normal operation
V2 CLESS – NOTICE D'UTILISATION - USER MANUAL v1.0
14