Publicité
Les langues disponibles
Les langues disponibles
5. FUNCTIONING / MANIPULATION
a) Installation / assembly:
- Unpack carefully the device of its packaging.
- Place the machine on a plane and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible
materials even if it is very well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessary.
- Remove the protective film around the machine and on the top.
- Install the wheels or adjustable feet.
- Place the grid holders and install the grids and the enamel plate.
- Place the machine to enable easy access to the plug.
b) First starting:
First cleaning
Clean the device and all accessories before the first use. (See 6 Cleaning)
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the
values indicated on the descriptive plate.
- Check that neither the cord nor the plug are damaged.
- Make sure that every control knob is positioned on 0.
- Unwind completely the electric power cable and connect it in a plug connected
with the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Command/Display
Thermostat (#3 on picture)
Green pilot light (#1 on pic-
ture)
Orange pilot light
(#2 on picture)
Function
Turn on the appliance and temperature setting
Appliance is on (pilot light on)
Machine is heating (pilot light on)
Setting temperature reach (pilot light off)
14
Publicité
