BEHAbelt HP01 Mode D'emploi page 28

2.6.6 Only the operational person is allowed to remain within the area of operation.
Other persons are not allowed to remain within the area of operation.
2.6.7
2.6.8
2.6.9
2.6.10 Shipment and transport only when the machine has cooled down and under
consideration of the general safety regulations.
2.6.11 Transport and storage of the machine only in closed conditions.
2.6.12 The hotpress is an electrical heating appliance for the welding of conveyor and
drive belts. Thermal security: Category 1 VDE 0721 – Part 2 §10.
2.6.13 Identification of the instrument (type, serial number, voltage, capacity, year of
construction): see type plate. The consecutive registered serial number allows a
check due to the acceptance and inspection certification.
2.6.14 Operating personnel: To avoid risks it is only allowed to operate the machine by
personnel which are trained or supervised by qualified persons (see article 3.4 of
VDE 0721, part 911).
28
Never deposit combustible objects on the heater
Do not touch hot components of the machine e.g. the heater!
This machine does not have explosion protection. Therefore it is not per-
mitted to operate this machine within explosive environments or rooms.