Zodiac Manta Guide Du Propriétaire page 4

Installation
Prepare the Pool
Inspect the interior of your pool. If the liner is brittle, has wrinkles, root or metal corrosion from the
underside, or damage to the supporting base or walls, do not install the cleaner until a qualified professional
makes any necessary repairs.
1. Manually vacuum the pool if excessive debris is present,
and make sure the pool filter and pump basket are clean.
2. Adjust the return lines to blow downward
to break up surface circulation and
ensure complete cleaning coverage.
• Loosen the fitting lock ring
• Redirect the eyeball downward
• Retighten the lock
If the return fitting cannot be adjusted,
the fitting must be replaced with a Zodiac
return line diverter (part #W90153 for 1-1/2",
#W90155 for 2" or #W24100 for pools
without return fittings).
Assemble the Cleaner
Stretch the disc over the foot pad with the
word "TOP" facing up. The disc should fit
securely in the groove and rotate freely
on the pad.
Slide the wheel deflector onto the extension
pipe until it is secure between the two lowest
pipe ridges. The deflector should rotate freely.
Assemble the Hose
For corner or end installations, connect enough
hose to reach the farthest point of the pool and
then add one more section.
Skimmer
4
For center installations, connect enough hose to
reach the farthest point of the pool and then add
two more sections.
Skimmer
1 Hose
Section
2 Hose
Sections