Publicité
Les langues disponibles
Les langues disponibles
1. a)
a)
c)
c)
d)
d)
2. a)
b)
b)
1. Positioning and opening shade
a) Plug the LED-cables of both pole sections together. Put the poles
together and tighten securely with the fastener.
b) First place the disc on the upper pole end and then screw the top on.
c) Pull the cabel of the lower pole through the support tube, then plug
the support tube into the lower pole and look it with the mounting
screw.
d)
Now, the electrical connection has to be done by a qualified
electrician. Then the umbrella including the support tube can be
assembled to the ground socket or the base.
d) Open the shade; pull the bolt lever downwards. Ensure that it
hangs downwards normally and none of the bars cross. Connect the
bolt lever to the runner and press downwards until it stops.
e) Adjust the switch on the runner to the wanted light power.
e)
0: Off I: low light II: bright light
b)
2. Closing
a) Release the bolt lever, unhinge the runner and close.
b) Pull out the material between the bars, fasten carefully and secure
with the tie.
E
Publicité
