Starting and Stopping
Starting the unit
When starting the unit, observe the precautions described from Page 4 in the section "For safe use of your product"
to ensure that you operate the product correctly.
Failure to observe the precautions could cause an accident or injury, or even lead to a fatality.
1. Cruise control lever
1. Power button
2. Power indicator LED
Stopping the unit
1. Trigger switch
2. Cruise control lever
WARNING
3. Trigger switch
3. Power button
4. Power indicator LED
Starting and Stopping
1.
Move cruise control lever all the way forward to stop position.
2.
Push power button once to turn on power to unit.
NOTE
Power indicator LED illuminates when power to unit is
turned on.
3.
Depress trigger switch to increase blower speed.
IMPORTANT
When power to the unit is turned on:
After one minute of inactivity, unit will power itself off.
If the LED remains lit, operation is normal.
If the LED flashes once per second, the battery needs to be
charged.
If the LED flashes four times per second, there is a fault with-
in the product. Turn power off to unit. Remove battery. Clear
debris from around fan. Install battery. Turn power on to unit.
If flashing continues, have your authorized servicing dealer
repair the product.
1.
Cruise control lever
Release trigger switch and move the cruise control lever com-
pletely forward (Stop position), and allow blower to stop.
2.
Push power button to turn off power to unit.
NOTE
Power indicator LED turns off when power to unit is turned
off.
∗ If the power button does not stop the blower, remove the bat-
tery to stop the power supply to blower. Have your authorized
ECHO servicing dealer repair power button before using blow-
er again. If the blower does not stop when the trigger is re-
leased and the cruise control lever is moved completely
forward (Stop position), remove the battery to stop the power
supply to blower. Have your authorized ECHO servicing deal-
er repair unit before using again.
18