Berner BJS-SHO 160 Notice Originale page 15

OBJ_BUCH-1811-003.book Page 15 Tuesday, November 17, 2015 12:25 PM
Action
Mounting the metal overshoe
Mounting the splinter guard
Orbital Action Settings
Adjusting the stroke rate
preselection
Switching the Power Tool
On/Off
Guide the power tool toward
the workpiece only when
switched on
Switching the worklight
On/Off
Lubrication when cutting met-
al
Plunge Cutting
Maintenance and Cleaning
 For safe and proper working, always keep the
machine and the ventilation slots as well as
the tool holder clean.
If the replacement of the supply cord is necessary,
this has to be done by Berner or an authorized
Berner service agent in order to avoid a safety
hazard.
Clean the saw blade holder regularly. For this, re-
move the saw blade from the machine and lightly
tap out the machine on a level surface.
1 609 92A 1D9 • 17.11.15
Figure Please observe
6
7
8
9
10
11
12
13
14
Regularly spray penetrating oil onto the saw blade
holder (see figure 16, page 174).
Check the guide roller regularly. If worn, it must be
replaced through an authorised Berner after-sales
service agent.
Lubricate the guide roller occasionally with a drop
of oil (see figure 17, page 174).
In all correspondence and spare parts orders,
please always include the 6-digit order number
given on the nameplate of the machine.
Page
168
169
169
170
170–171
171
172
172
173
English | 15