Berner BJS-SHO 160 Notice Originale page 13

OBJ_BUCH-1811-003.book Page 13 Tuesday, November 17, 2015 12:25 PM
Symbol Meaning
Mitre/Bevel Angle
Low stroke rate/speed
High stroke rate/speed
Switching On
Switching Off
On/Off switch lock-on
Worklight
Prohibited action
Correct result
Saw with moderate pressure
in order to achieve optimal
and precise cutting results.
When sawing metal, apply
coolant/lubricant alongside
the cutting line
Article number
P Rated power input
1
n Stroke rate at no-load
0
Cutting depth, max.
Wood
Aluminium
Metal
Particle board
Weight according to
EPTA-Procedure 01:2014
/II Symbol for protection class II
(completely insulated)
1 609 92A 1D9 • 17.11.15
Symbol Meaning
L Sound pressure level
pA
L Sound power level
wA
K Uncertainty
a Vibration total value
h
Handle
Gear head
Delivery Scope
Jigsaw, splinter guard and extraction kit.
Parallel guide, application tool and other accesso-
ries shown or described are not part of the stand-
ard delivery scope.
Intended Use
The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ceramic
plates and rubber while resting firmly on the work-
piece. It is suitable for straight and curved cuts with
mitre angles to 45 °.
The light of this power tool is intended to illuminate
the power tool's direct area of working operation
and is not suitable for household room illumination.
Technical Data
The technical data of the machine are listed in the
table on page 164.
The values given are valid for a nominal voltage [U]
of 230 V. For different voltages and models for spe-
cific countries, these values can vary.
Declaration of
Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with all relevant provisions of the direc-
tives 2009/125/EC (Regulation 1194/2012),
2011/65/EU, until 19 April 2016: 2004/108/EC,
from 20 April 2016 on: 2014/30/EU, 2006/42/EC
including their amendments and complies with the
following standards: EN 60745-1, EN 60745-2-11.
English | 13