Care Instructions - JANE CONCORD Transformer iPLUS Mode D'emploi

_ CARE INSTRUCTIONS

The cover can be removed for washing.
To do so, move the head section (01) to its highest position. To remove, pull the cover
away from its anchoring points. Begin by removing the head section (01) followed by
the seat section and the shoulder shields (02). 6.a
Take the foam out of the
headrest cover (01) before
washing it.
Before washing the cover, take the
polystyrene out of the pockets of the
shoulder area (02).
• When they come into contact with moisture, especially
during washing, the cover fabrics may fade slightly.
• Do not use solvents!
To replace, start with the cover for the seat section. First pull the cover over the cover
panel on the backrest. Then pass it beneath the lap belt guides (03) and insert the
fixings into the channel running along the edge of the seat.
EN
33