Functions - Bresser TemeoTrend SQ Mode D'emploi

read the „Manually setting the time and date"
section.
Pay attention: The weather station can receive
the signals from up to 3 outdoor sensors and
display the data. Position the weather station
and outdoor sensor within the maximum
permitted reception range, which amounts
to about 50 meters under normal conditions.
The transmission of the radio signal can be
interrupted in some cases. If necessary,
remove the batteries from the weather station
and outdoor sensor and perform the above
mentioned steps once again.

Functions

Weather station
LCD-Display
Displays the current time, alarm time, indoor
and outdoor temperature. The TemeoTrend
ST (Type. No. 70-04401), TemeoTrend LG
(Type. No. 70-04402) and TemeoTrend JC
(Type. No. 70-04404) models additionally
display the weather forecast.
L700X40XMSP1215BRESSER.indd 19
TemeoTrend LG (Type. No. 70-04402)
and TemeoTrend JC (Type. No. 70-04404)
models additionally display the relative
humidity.
SNOOZE/LIGHT button (Fig. 1a, 1)
Press the button to activate the backlight.
When the alarm sounds, press the button to
interrupt the alarm and activate the snooze
function.
SNOOZE button (Fig. 1b, 1)
When the alarm sounds, press the button to
interrupt the alarm and activate the snooze
function.
DISPLAY SET (TIME SET) button (Fig. 1, 5)
Press and hold down the button for about
2 seconds to change into the time setting
mode. Press the button in the time setting
mode, to skip to the next input field. Press
and hold down the button for about 2 seconds
in the setting mode to save the settings and
exit the setting mode.
DE
GB
FR
NL
ES
IT
19
14.12.15 13:2