To Activate/Deactivate Feature Lighting; To Activate/Deactivate The Height Adjustment Function - Miele DARC 6 Mode D'emploi

After approx. 10 seconds the remote
control LED will flash on and off twice
with a longer interval between the flash‐
es. The remote control has now been
signed off. The LED will go out after a
short while.
 Confirm the signing off procedure by
pressing the run-on option control
515 on the cooker hood. All indica‐
tors will go out.
Please bear in mind that disabling the
signal will also disable any Con@ctivi‐
ty 2.0 function and this will have to be
activated again.
* for appliances with sensor controls
To activate/deactivate feature light‐
ing 
If your cooker hood has feature lighting
in addition to the hob lighting, e.g.
glass edge feature lighting, it can be
switched on and off using the remote
control.
This function must also be activated on
the remote control.
 Press both arrow controls  at the
same time and hold for about 5 se‐
conds until the remote control LED
flashes.
 Press the control for the feature ligh‐
ting .
 To activate press the "" control, to
deactivate press the "" control
Programming is completed automati‐
cally.
en - Signing on/off the remote control
To activate/deactivate the height ad‐
justment function 
If your cooker hood has a motorised
height-adjustable canopy, this can be
adjusted using the remote control.
This function must also be activated on
the remote control.
 Press both arrow controls  at the
 Press the button for the run-on option
 To activate press the "" control, to
Programming is completed automati‐
cally.
same time and hold for about 5 se‐
conds until the remote control LED
flashes.
.
deactivate press the "" control
13