BabyGo Gosafe Car Seat Instructions De Montage page 23

FITTING THE BOOSTER SEAT WITHOUT BACKREST USING THE SEAT BELT
LOCK 22-36 kg (approx. 3 years to 11 years)
Step 1: Place the booster seat on the seat of the car ensuring it is firmly
against the car seat backrest.
Step 2: Place the child in the booster seat.
Step 3: Fasten seat belt, making sure that the lap belt webbing goes under
both armrests and the diagonal belt webbing goes under the armrest neat
the buckle. Check that the webbing has not become twisted and tighten the
seat belt by pulling the diagonal strap upwards.
Step 4: Check the seat belt to ensure there is no slack and the belt is not
twisted.
Note: The vehicle seat buckle is not positioned in or in front of the specified
(labelled) belt guide of the child restraint system.
Make sure the seat belt has not become twisted.Also check that the cover is
not impeding the movement or fit of the seat belt webbing in any way.
To release your child unfasten the seat belt in the normal way.
The satificatory position of the adult safety-belt
buckle relative to the child car seat is as the FIG.
You can contact the child car seat manufacture
if in doubt about the point.
Gosafe Car Seat
23