Publicité
Les langues disponibles
Les langues disponibles
TIGHTENING THE HARNESS
SLACKENING THE HARNESS
FITTING THE SEAT WITH THE 3-POINT LAP & DIAGONAL SEAT BELT 9-18 kg
(approx. 9 months to 4 years)
Step 1:
Step 4:
20
Pull the shoulder straps upwards to remove the slack from
the lap sections of the harness then pull the adjuster strap
until the harness is fully tightened.
The harness should be adjusted as tightly as possible
without causing discomfort to your child.
Ensure that the lap strap portion of the harness is loca-
ted as low as possible towards the thighs-not around the
tummy.
A loose harness can be dangerous.
Check the harness adjustment and tighten each time the
child is placed in the seat.
The harness is slackened by pressing the lever (under the
seat cover) on the front of the seat.
Press down on the label marked "Press" as you grip the
two shoulder straps with your other hand. Pull the shoul-
der straps towards you to loosen the harness.
Take care when you adjust the shoulder straps that you do
not trap the harness adjuster straps as you press the lever
down.
Gosafe Car Seat
Step 2:
Step 3:
Step 5:
Publicité
