brennenstuhl BSV 3 Mode D'emploi page 14

Operating instructions
- Protect the housing from mechanical damage such as impacts or powerful blows.
- Never operate the distribution box if it is defective.
- Avoid tripping hazards.
PACKAGING AND TRANSPORT
Packing
Packaging materials are valuable raw materials and can be recycled.
Therefore, feed the packaging materials into the recycling loop.
If this is not possible, dispose of the packaging materials in accordance with the
applicable local regulations.
Transport
Check your delivery for completeness and damages. If you notice any transport
damage or if the delivery is incomplete, please notify your distributor immediately.
STRUCTURE OF THE DEVICE (SEE PAGE 2)
Products may differ from the respective illustration due to country-specific plug-in
systems and different equipment!
Compact rubber power distributor BSV 3
Mobile power distributor BSV 4
Small power distributor BKV 2/4
Housing

Carrying handle

Protective equipment

CEE socket

COMMISSIONING
The activities described in this chapter may only be carried out by a qualified
electrician!
The device is intended exclusively for level standing on all four feet (BSV 3)
or standing on the stand (BSV 4 and BKV 2/4) or on the underside of the
housing (BKV 2/4). The position of use is defined by the opening direction of the
hinged cover of the socket outlets towards the top.
WARNING
If the device is connected to a supply line with an insufficient cable cross-section
and/or insufficient back-up fuse, there is a risk of fire, injury or overload which
may cause damage to the device. Observe the information on the type plate!
14
027621 BA_Baustromverteiler 0533497.indd 14 027621 BA_Baustromverteiler 0533497.indd 14
Schuko socket

Connection cable

Connection plug

Tubular steel frame

BSV 3, BSV 4, BKV 2/4
06.07.21 14:02 06.07.21 14:02