Description; System Description; Display Range - Baumer PA203 Guide Utilisateur

PA203
Linear increase: Display scaling defines interaction of input signal and displayed
Displayed
value 2
Displayed
value 1
Measured Measured
value 1 value 2
Linear decrease: There are two options to enter the value coordinates: Either by
Displayed
value 1
Displayed
value 2
Measured Measured
value 1 value 2
14

2 Description

2.1 System description

Intended use of the process display is to visualize current and vol-
tage in industrial applications.
- Voltage input AC/DC up to 600 V
- Current input AC/DC up to 5 A
- Display range can be linearised
- LED display, 4 digits and programmable
- DIN housing 48 x 24 mm

2.2 Display range

value. Linear behavior requires defining two measured values - (inP)
respectively displayed values (dSP). Both limits should be at the
end of the display area to ensure maximum precision.
keypad (in SCAL mode) or using the teach-in feature (teach mode).
Assigning the displayed values requires manual entry (with device
still in teach mode).
Display
4 digits
Sticker to indicate measuring unit
www.baumer.com