Hkoenig KUBE KB15 Manuel D'utilisation page 4

To avoid a hazard due to instability of the appliance, it must be placed at a even or flat
surface.
1. Cover:
OPERATING PROCEDURES & MAINTENANCE
2. Ice scoop.
3. Ice shovel.
4. Control Panel:
A. LCD display window.
1: Current Clock Time
2: No water diplay,When flashing, means no water in the unit, need to pour water in.
3. Ice-full display, when it display, means the ice basket is full of ice-cube.
4. ON/OFF display, if the unit has been turned off, this symbol will flash; And if the
5.Clean symbol: when this symbol flashs, means the unit need to be cleaned.
6.Ice-cube size displaying: Small, Medium, and Large.
7.Timer delay time display.
B. ON/OFF button: To start or stop the unit.
C. SELECT button: To select your desired size of the ice-cube:
D. CLOCK button: To set the displayed time to the correct current time.
E. TIMER button: To set or cancel the timer program to let the unit start to run at your
5. Water drain cap:
6. Air Outlet
7.Ice basket
UNPACKING YOUR ICE MAKER
1. Remove the exterior and interior packaging. Check that ice basket and ice scoop is
included. If any parts are missing, please contact our customer service.
2. Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and clean it
3. Find a location for your ice maker that is protected from direct sunlight and other sources of
With a transparent window to allow interior visibility.
Easy to use, visible functions and LCD display setting.
unit is turned on, this symbol will always display.
small, medium,large, three size of the ice-cube can be selected.
Or to change the time digit during the clock or timer setting program.
desired time or stop the unit at your desired because of forgetting.
For draining water from water reservoir.