zomo MC-1000 Manuel D'utilisation page 16

ZOMO MC-1000
V DJ - CONTROL & FUNCTIONS
IRTUAL
35. Sync Button
The current track's pitch and phase will be synchronized to the master deck
36. Cue Button 1 Decks A/C
Use this control to make the deck jump to hotcue point 1. If no Cue point exists, it will be stored
with this button.
Hot Cue Delete Button
Pressing this button and then releases it, deletes the stored cue points
37. Cue Button 2 Decks A/C
Use this control to make the deck jump to hotcue point 2. If no Cue point exists, it will be stored
with this button.
Hot Cue Delete Button
Pressing this button and then releases it, deletes the stored cue points
38. Cue Button 3 Decks A/C
Use this control to make the deck jump to hotcue point 3. If no Cue point exists, it will be stored
with this button.
Hot Cue Delete Button
Holding this button down and then releasing it deletes the stored cue point
39. Shift Button
Turns the MC-1000 into shift mode, When this button is pressed, some of the device's controls
element receive a different function assignment
(Shift #)
Shift Button
Turns the MC-1000 in shift mode
40. Cue Button 1 Decks B/D
Use this control to make the deck jump to hotcue point 1. If no Cue point exists, it will be stored
with this button.
Hot Cue Delete Button
Pressing this button and then releases it, deletes the stored cue points
41. Cue Button 2 Decks B/D
Use this control to make the deck jump to hotcue point 2. If no Cue point exists, it will be stored
with this button.
Hot Cue Delete Button
Pressing this button and then releases it, deletes the stored cue points
16
(Shift #)
(Shift #)
(Shift #)
(Shift #)
(Shift #)
www.zomo.de