CDVI SOLSYSDW Mode D'emploi page 6

INSTALLATION MANUAL
SOLSYSDW
Mifare Desfire EV1 13.56MHz Reader - Wiegand
® ®
This product is a RFID cards reader intended for an acces control application.
1] PRODUCT PRESENTATION
Wiegand 26, 30 or 44 bit
Desfire EV1 (Tag 2 to 8 K) / Mifare
®
direct connection or with the door controller
(INTBUSW)
audible and visual feedback
tamper switch
AES 128 encryption
dimensions (L x W x D) : 163 x 82 x 26 mm
technology : 13.56MHz
input voltage : 12V dc
consumption : 200mA
frequency band :
13.553 - 13.567 MHz
maximum transmitted power
< 60 dBμA/mA
2] REMINDERS AND RECOMMENDATIONS
Suggested power supplies
ADC335 & BS60 (in case the reader is
powered neither by the controller nor by the
reader controller INTBUSW). These products
must be powered in 12V dc and the power
supply should be certified EN60950-1:2006/
A11:2009 standards and should be designed
to be a low power supply source.
Recommended cables
4 twisted pairs 0.6mm (AWG 24).
3] MOUNTING KIT
EU Declaration of Conformity : We CDVI declare that the SOLAR2R radio equipment complies with Directive
2014/53/EU. The full text of the EU declaration is available at www.cdvi.com
6
cdvigroup.com
classic
®
IP54
IK10
-40°C to +70°C
This product is supplied with a varistor.
The varistor must be connected directly to the
locking system terminals (electric strikes, elec-
tromagnet, or lock) operated by the device.
If the device funcions with several locking
systems, each one must be fitted with a varistor.
The varistor limits overload produced by the
strike coil, known as self-effect or back-emf. If
you are using a "Shear Lock", electromagnet
or other type of electric lock, we recommend the
use of a dedicated power supply for the lock.
3x30
TF screw
SOLSYSDW 2
82
82
S5 Plastic
Torx key
®
anchor
2 1
EN
26
15
60
Ce document est la propritété exc
This document is the exclusive pr
F0101
C.A. :
S
Pl
Material : ZP5 / PC
Ge
DWG.: A. Broustal
Vo
For optimal
illumination,
do not fold
the cable
inside
the product.
Varistor
1