Black & Decker CD700 Mode D'emploi page 24

ENGLISH
the cable firmly and that the two leads are correctly
fixed at the terminal screws. If the fuse cover is
missing or damaged do not use the plug.
For replacement or detachable fuse covers,
contact a Black & Decker service agent.
Warning! Never connect live or neutral wires to the
earth pin marked E or
MAINS PLUG REPLACEMENT
(AUSTRALIA AND NEW ZEALAND ONLY)
Should the mains plug or cordset of the product be
damaged, it must only be replaced by an authorised
Black & Decker service agent because special
purpose tools are required.
EXTENSION CABLES
Up to 30m (100ft) of 3-core extension cable can be used
without undue loss of power.
Note: An extension cable should not be used unless
absolutely necessary. Use of an improper extension
cable could result in a risk of fire and electric shock.
If an extension cable must be used, make sure it is
properly wired, contains the correct rated fuse as
recommended in its literature and is in good
electrical condition.
UNWANTED TOOLS AND THE ENVIRONMENT
Should you find one day that the tool needs
replacement or is of no further use, think of the
protection of the environment. Black & Decker
service agents will accept old tools and will
dispose of them in an environmentally safe way.
THE BLACK & DECKER GUARANTEE
(UK, AUSTRALIA AND NEW ZEALAND ONLY)
If the Black & Decker product becomes defective due
to faulty materials and workmanship, within 24 months
from the date of purchase, we guarantee to either
replace all defective parts or at our discretion, replace
the unit free of charge provided that:
• The product is returned to us or our authorised
repairers with evidence of date of purchase.
• The product has not been used for trade,
professional or hire purposes.
• The product has not been subjected to misuse
or neglect.
• The product has not sustained any damage through
foreign objects, substances or accidents.
• Repairs have not been attempted by anyone other
than our authorised repair distributors.
24
CD700 KX1600-1683 ML p22-39
.
24
This guarantee is offered as an extra benefit and is
additional to the customers statutory rights.
AFTER SALES SERVICE FOR YOUR BLACK & DECKER
PRODUCT (UK, AUSTRALIA AND NEW ZEALAND ONLY)
It is our aim that all Black & Decker customers should
be totally satisfied with their Black & Decker product
and after sales service.
Black & Decker offers a nationwide network of
authorised service agents to give help and advice.
The use of other than genuine Black & Decker
accessories and parts may damage or reduce the
performance of your Black & Decker product and may
also endanger the user. The terms and conditions of
the warranty may also be effected.
ACCESSORIES
The performance of any power tool is dependant upon
the accessory used. Black & Decker accessories are
engineered to high quality standards and are designed
to enhance the performance of your tool. Buying a
Black & Decker accessory will ensure that you get the
very best from your Black & Decker tool.
TECHNICAL DATA
The level of sound pressure of the tool is in
accordance with EEC legislation. It is recommended
that you take appropriate measures for the protection
of your hearing if the sound level seems
uncomfortable. This normally equates to a sound
pressure in excess of 85dB (A).
CD700 KX1600 KX1682 KX1683
Power 1400W 1400W 1600W 1600W
Cable length 2m 3m
Switch position 1 550˚C 550˚C
Switch position 2 - -
Switch position 3 - -
Note: This user manual also covers more than one
catalogue number within this product group. Refer to
your carton for details of your product.
Your product includes some or all of these features.
FEATURES
1. Nozzle
2. On/off heat setting switch
3. Air inlet holes
4. Stands
5. Hanging ring
07/01/2000, 3:39 pm
3m 3m
140˚C 140˚C
560˚C 380˚C
- 560˚C