Installation - THORENS TEP 3800 Mode D'emploi

Installation

The TEP 3800 is a preamplifier designed for purifying signals from
different sources at best possible quality for power amplifiers (e.g. for
the monoblock Thorens TEM 3200).
Always conduct connections with pre/ power
amplifiers being switched off.
Connections at the rear panel
TUBE STEREO PREAMPLIFIER
Tape-Out Tape-In Fix Tuner
Powered by:
Fix
The input signal is amplified with a fixed value, thereby bypassing the
volume control. Using this input you may connect one or several TEP
3800 to a 5.1 or 7.1 surround processor. In such a case the volume
is controlled centrally by the surround processor.
Tape-in
Input for using a tape recorder as input source.
Tape-out
Output for recording onto a tape recorder.
Aux2 Aux1 CD Pre-Out
22
Model: TEP 3800
L
Aux1 CD Pre-Out
R
Cinch XLR
Ser.-No.:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AC 220 - 240V ~ 50Hz
FUSE T1AL 250V
POWER CONSUMPTION 100 W