Vollrath Mirage 59500 Manuel D'utilisation page 3

Mount the Control Box
1. Measure the area for the control box cutout.
2. Apply sealant to the space between the control box and the
mounting surface to prevent moisture penetration.
3. Secure the control box to the mounting surface.
4. Plug the USB cable from the control box into the bottom of the
range.
FEATURES AND CONTROLS
Drop-in Range Control Panel
F
E
A
Countertop Range Control Panel
A B C
A On/Off button.
B Power/Temp button. Press to toggle between power level (1-100)
and temperature control, and Fahrenheit and Celsius.
C Timer button. Starts the timer.
D Control knob. Selects the temperature, power level or time,
depending on the mode.
E ºF and ºC LEDs. Illuminate to indicate which temperature is
displaying.
F Display panel. Displays the power level, temperature, timer time
or an error code.
G Timer LED. Illuminates when timer function is operating.
®
Mirage Countertop and Drop-in Induction Ranges Operator's Manual
G
B C D
F E
G D
OPERATION
WARNING
Electrical Shock Hazard
Keep water and other liquids from entering the inside of the
equipment. Liquid inside the equipment could cause an
electrical shock.
CAUTION
Burn Hazard
Do not touch hot food, liquid or heating surfaces while
equipment is heating or operating.
NOTICE: Do not preheat empty cookware. Because of the speed and
efficiency of the induction range, cookware can very
quickly overheat and be damaged.
NOTICE: Do not drop cooking utensils or other objects onto the
cooking surface. The strong, non-porous surface will
break. The warranty does not cover this type of abuse.
NOTICE: Do not leave an empty pan on an operating unit.
NOTICE: Do not heat sealed cans or containers as they may
explode.
Turn on the Induction Range
Press and release .
Adjust the Power Level or Temperature
Increase or decrease
Rotate the control knob.
• Clockwise increases the numbers.
• Counterclockwise decreases the numbers.
Switch between power and temperature modes
Press and release .
Switch between Fahrenheit and Celsius
Press and release .two times.
Cook Food
The display should remain constant during operation. If the display is
flashing, see the Troubleshooting section in this manual.
Removing cookware from the cooking surface for more than ten
minutes will cause the unit to automatically turn off. Removing
cookware for less than ten minutes will not interrupt operation.
Use the Timer
1. Press and release . The timer LED will flash.
2. Rotate the control knob to set the time in full minutes (1-180).
3. When the timer cycle is complete, the range turn off.
4. To cancel the timer, press
temperature mode.
. The range will return to power or
3