BATTERY REPLACEMENT
1.
The battery pack is located in the Battery housing (5).
2.
Turn the Switch (8) to the "OFF" position. Remove the four screws from the Battery housing (5).
Separate the Battery Pack connector. Remove old battery pack. Replace only with identical
Rechargeable Battery Pack (14).
Note- Please refer to
3.
Check correct Polarity of battery replacement
4.
Replace the cover of the Battery housing (5). Secure it with the four screws.
(5) Battery Housing
FAQ-
My solar motion light is not illuminating how can i troubleshoot?
Ensure the light LUX setting is turned directly towards the moon. Also turn OFF the unit and place in the full
sun for 3 days. At the end of the third day flip the switch over to AUTO. If this is done at dusk the light
should begin to work. This essentially acts as a system reset.
My solar motion light is no longer as bright, what can I do?
Seasonally you may need to re-orientate the panel to optimize sun exposure especially in areas of lower
light conditions. You may also need to replace the battery pack
Is my solar motion light weatherproof?
Both the light fixture and solar panel are fully weatherproofed.
This product is covered under a one year limited warranty. Sunforce Products Inc. warrants to the original
purchaser that this product is free from defects in materials and workmanship for the period of one year
warranty from date of purchase. The included battery is not covered under this warranty.
To obtain warranty service please contact Sunforce Products for further instructions, at 1-888-478-6435.
Monday to Friday, 8:30 am to 5:00 pm (Eastern Standard Time), Montreal Canada or email us
info@sunforceproducts.com. Proof of purchase including date, and explanation of complaint is required for
warranty service.
www.sunforceproducts.com
(8) On/Off/Auto Switch
for battery replacement
(14) Rechargeable Battery
Pack
Battery Pack connector
4