Publicité
Les langues disponibles
Les langues disponibles
Congratulations on your Sunforce Products purchase. This product is designed to the highest technical
specifications and standards. It will supply years of maintenance free use. Please read these instructions
thoroughly prior to installation, then store in a safe place for future reference. If at any time you are unclear about
this product, or require further assistance please do not hesitate to contact our trained professionals operating the
customer support line at 1-888-478-6435. Monday to Friday, 8:30 am to 5:00 pm (Eastern Standard Time),
Montreal Canada or email us
Your Solar Motion Light is the perfect system for your home and business. It is controlled by a sensor,
which measures ambient luminance and movement. Your solar motion light has an average detection
distance of up to 30 feet (9 meters), with a 180° detection range.
Part
Description
1
Lamp
2
Solar panel with 15 ft (4.5 m) wire
3
Expansion screw
4
80 LED Light Bulbs
5
Battery housing
6
Motion detector head
7
U-shaped mounting plate
Installation of the light
Mounting your light requires a screwdriver, pencil and (in some circumstances) a power drill.
•
Place the U-shaped mounting bracket on the surface you wish to mount to.
•
Mark with a pencil the position of the U-shaped mounting bracket screw holes. This will enable you to
•
pre-drill your screw holes.
Once the U-shaped mounting bracket is installed, ensuring all screws are tight, you are ready to
•
position your 80 LED Solar Motion Light.
info@sunforceproducts.com
PARTS LIST AND ASSEMBLY DIAGRAM
Part
Description
8
ON/OFF/AUTO switch
9
Battery housing outlet
10
Solar panel mounting bracket
11
LUX adjustment
12
SENS adjustment
13
TIME adjustment
14
NI-MH battery (not shown)
2
Publicité
