BETTE SILHOUETTE Instructions De Montage page 3

Important information –
EN
Please note!
Key to symbols
Warning - risk of electric shock
Warning - risk of water damage
Warning of crushing
12 V electrical connection
12 V
Control cable
Water supply
Water drain
Incorrect installation
Cross-reference to other products or documents
General advice
• The function, safety and integrity of the product are only
guaranteed if the instructions given in this manual are
adhered to. Non-observance of the safety instructions
could lead to bodily injury and damage to property.
• The manufacturer is not liable for damage resulting from
non-observance of the instructions.
• To avoid installation errors and damage to the product, it
is essential that the installation instructions are followed
carefully.
• Besides the information given in this manual, please
follow the relevant general safety and accident
prevention regulations.
• This product left our factory in a condition complying
with all the requirements of technical safety.
• Figures are not true to scale
• Subject to technical modifications.
Installation instructions
• Installation may only be carried out by qualified specialist
personnel.
• Observe the special requirements for electric installations
in wet rooms.
• If it is not possible to drill into the sub-structure (e.g.
due to underfloor heating) then the feet can be glued in
place.
• The tightness of the fittings to the bath tub must be
checked and ensured when installing.
• The underlying structure must be suitable for bearing the
weight involved.
• Handle this product with the utmost care to avoid
damaging it. Rings and other objects that may damage
the product must be removed before starting the
installation work.
• Large, bulky or heavy items must be installed by two
people.
Separate documents (e.g. for electrical connections)
should be complied with.
3