Leading Edge RAPTOR TRIREX Manuel D'instructions page 9

R
10.0 HOISTING:
10.1 Loads may slip or fall , if the Raptor TRIREX
10.2 Do not use with damaged slings or chain. For inspection criteria see ASME B30.9.
10.3 Utilize appropriate Rigging Gear suitable for overhead lifting.
10.4 Utilize Rigging Gear within the industry standards and the manufacturer's recommendations.
10.5 Conduct regular inspection and maintenance of the Rigging Gear.
10.6 DO NOT hook lifeline to designated Hoisting Guide-Rings.
10.7 Secure auxiliary equipment and material before hoisting the Raptor TRIREX
10.8 The Raptor TRIREX
chain sling. The Raptor TRIREX
the following illustration for proper hoisting:
T R ™ I
RI EX
APTOR
™
was designed to be hoisted by a crane with the use of a four-leg wire rope sling or bridle
™
™ may also be lifted by a forklift using the designated Fork Pockets. Refer to
HOISTING DIAGRAM
NSTRUCTION
*WARNING*
Unit is not hoisted properly, resulting in injury or death.
Lifting
Sling
Fork
Pockets
8
M
ANUAL
.
™
E
N
G
L
I
S
H