Loewe SL 150 Instructions De Montage page 26

Safety
These installation instructions are intended to make installation easier for the technician.
The installation instructions (in short EBA) are not for the end customer.
Attention
The warning triangle indicates instructions for the protection of persons, equipment
and the environment.
Warning instructions are indented and have a bold heading. Observe these instructions.
Note
These installation instructions are applicable for the upgrade kit (in short ARS) WLAN 70830 081 Chassis
SL1XX.
The upgrade kit is suitable for the TV set: Individual 32 Selection Sound LED, ART 32 LED/ 37 LED/ 40 LED/ 46
LED, Connect 32 LED/ 40 LED
After installing the upgrade kit, the current software package must always be loaded. You can fi nd this at the
following addresses: http://service.loewe.de http://infotip.de
The numbers "(X)" in brackets stand for the item numbers of the content listed under point "5".
These instructions describe the installation of upgrade kit 70830 081.
5. Contents - Upgrade Kit 70830 081 Module WLAN
Item no Quantity
(1) 1
(2) 1
(3) 1
(4) 1
(5) 1
(6) 10
(7) 5
(8) 1
(9) 2
(10) 1
(11) 1
(12) 2
Fig. 25
Designation
EBA -ARS WLAN
WLAN-ANT 3X MIMO
WLAN module
Cable harness 11 POL 190mm
Cable harness 11-POL 165mm
Screws SF M3 x 6-K T10
Felt strip
WLAN cover
Cable holder 9.1 x 10.7
WLAN antenna holder
WLAN holder
Contact foam
26
Order number
34647 000
71023 001
70830 001
70833 003
70833 002
33715
25204
71029 001
34061
71020 001
70933 001
33104 001
Note
The felt strip (7) has been cut to shape
beforehand. This allows you to fasten the
antenna lines in the TV set.
Use it as and when required.
The cable harness (4) is used for TV sets with
screen size 40".
The cable harness (5) is used for TV sets with
screen size 32".
The cable holders (9) are not required anymore
for the TV set ART40 and Connect 40.