Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. Functions
Power
•
Press the
to turn on the appliance. The heater
will turn on and the indicator at Power position I
and Fan speed position I will illuminate.
•
Pressing the
again will set the heater to power
setting II and speed II. The corresponding LEDs
will illuminate. When increasing the power output,
the fan speed automatically increases as well to
prevent overheating of the product.
•
Pressing the
again activates the highest heat
setting, and the light at power position III will
illuminate.
Note: power level II & III can only be used in
combination with speed II (boost)
•
Pressing the
once more will reset the heat
and fan speed setting
to I.
•
To switch off the appliance, the
must be
pressed for ±2 secs.
•
After switching off the heater, the fan will remain
on for ± 30 seconds to cool the heating element
down. After this, the appliance automatically
returns to the stand-by mode.
10
Fan speed
•
Pressing the
when the product is in stand-by
mode increases the fan speed and the Power
output. This is indicated by the LED from
Indicator Fan speed II and Indicator Power level II.
•
Pressing the
again will reset the fan speed
and power level to I.
•
Pressing the
for ± 5 secs. activates the WiFi
pairing mode.
Wifi
•
When turning on the heater using the main
power switch (item 12 in chapter 2), the WiFi
will automatically be activated and start pairing
mode. The WiFi indicator (item 10 in chapter 2)
will blink red for 3 minutes or until pairing has
been successful.
•
Pairing mode can be re-activated pressing the
for +/- 5 seconds.
•
The pairing mode will automatically be
deactivated when the product is unable to
connect to a device within 3 minutes.
•
When pairing is successful, the WiFi indicator will
turn blue.
•
For further instructions on how to pair your
product to WiFi, please refer to the Duux App.
WIFI and APP operation
Scan below QR code to download the Duux APP
or search DUUX APP in the App Store or Google
Play Store to start the procedure to download the
APP. Once installed, enter your e-mail address and
complete the registration.
APP STORE
PLAY STORE
Connect to WIFI
Once registered, click "add duux device" on the
1
main screen or use the "+" button in the top
right corner to add a new device.
Search for "Threesixty" and press to continue
2
Connect to your preferred WiFi network and
3
enter the corresponding password
Follow the instructions in the app to complete
4
the pairing process.
11
Publicité
Chapitres
Table des Matières
